MAEDA MC405
MAEDA MC405 SPIDER CRANE
Offering the best balance of power and design in Mini Cranes The MAEDA MC405 Spider Crane is in a class of its own.
■ Pick & Carry Duty (300kg maximum)
■ Two Travel Speeds
■ Programmable Moment Limiter
■ 1130kg at 5.0m radius on 16.43m boom
■ Rubber Tracks
■ Hydrostatic Transmission
■ Centralised Controls
■ 4 Fall / 2 Fall Hook Block
■ Automatic Hook Stowage System
■ Tilt Sensor/Alarm
■ Powerful Winch with Hydraulic Disc Brake
■ Two Speed Winch
■ Fully Automatic Pentagonal Section Boom
■ Cable Remote Controller
SPECIFICATION
| 300kg Pick & Carry Duty | Fly Jib Capabilities |
| Energy Saving System | Sheaves Protected Inside Boom |
| Variable (Hi/Lo) Travel Speeds | Programmable Moment Limiter |
| Hydrostatic Transmission | Centralized Controls |
| 4 Fall / 2 Fall Hook Block | Automatic Hook Stowage System |
| Tilt Sensor/Alarm | Powerful Two Speed Winch & Hydraulic Disc Brake |
| Remote Control |
Model
MC405CRM(E)
Crane capacity
3.83t x 2.7m
Max. working radius
16m
Max. lifting height
16.8m
Hook speed
10m / min. (18.0m / min.) (4 falls, 4th layer)
Single line speed
40m / min. (72.0m / min.) (4th layer)
Hoist rope
IWRC 6 x WS(26) 8mm x 95m
Telescopic system
-Boom length - 4.735m - 16.475m
-Telescoping speed - 11.7m / 54.2 sec (41.3sec)
-Boom type - Fully automatic 5 section pentagonal telescopic boom
Boom hoist system
Hoist angle / speed - 0° - 80° / 24.5 sec (17.0 sec)
Slew system
Slew angle / speed - 360° / 2.1 rpm (2.5 rpm)
Outrigger system
-Type - Extension and set up by direct acting hyraulic cylinders
-Maximum extended dimensions - (Length) 5786mm x (Front) 5118mm x (Rear) 5520mm
Traction system
-Drive - Hydraulic motor driven, stepless speed changer
-Travel speed - 0 - 3.3 km/h
-Gradability - 20°
-Crawler length x width - 2100mm x 320mm
-Ground pressure - 49.0 (0.50) kpa (kgf/cm/2)
Engine
-Model - Yanmar 3TNV88-PMB
-Type - 3 cylinder water cooled diesel
-Rated output - 21.8kw/2400min-1 (29.6PS/2400rpm)
-Starting medthod - Electric
-Fuel / Fuel tank capacity - Diesel/60L
Electric Motor MC405CRME
-Type - Totally enclosed fan-cooled motor
-Size - 7.5kw, 4P 380V
Remote control system
- Type - Cable remote controller, micro-speed mode, load display for transmitter, outrigger operation
Dimensions
-Length x Width x Height - 4980mm x 1380mm x 1980mm
-Weight MC405CRM - 5600kg
-Weight MC405CRME - 5750kg
Standard equipment
Overwind protection, load indicator, hydraulic safety valve, wire rope latch, level, machine body inclination alarm, EMO switch, travel lock lever, outrigger interlock device, moment limiter, rotary lamp, 4-fall / 2-fall hook block.
Optional equipment
Radio remote control, white rubber tracks, single fall hook, searcher hook, fl y-jib.
LOAD CHART
The Total Rated Load Charts are based on the actual working radius including boom defl ection. The weight of the hook (standard 4 fall - 30kg) must be included as part of the load shown in the Total Rated Load Charts. When using two fall or single fall hooks, use the appropriate four fall Total Rated Load Chart above but with a maximum load of: Two Fall - 1930kg, Single Fall - 970kg.